航天器姿态预设性能控制方法综述

针对存在不确定惯量矩阵及其它未知不确定性(如执行器故障、航天器结构发生突变等)下的航天器姿态控制问题，综述了预设性能控制及其应用的研究进展。首先阐释了预设性能控制方法的基本内涵及其关键步骤；然后分析总结了现有航天器姿态控制以及预设性能控制研究的基本概况与发展趋势；最后面向未来复杂化、智能化的空间任务对航天器控制系统提出的新需求，提出航天器预设性能控制值得研究的问题和方向。     

变体辅助的无人机栖落机动模糊控制设计

无人机（Unmanned aerial vehicle， UAV）的栖落机动是一种大幅度的俯仰运动，易引起升降舵操纵力矩饱和。本文以变体方式增强无人机的俯仰操纵能力，并研究其对应的控制设计方法。首先对栖落机动建立了纵向动力学模型，并通过采用轨迹线性化和张量积变换方法转换得到T-S模糊模型。基于Lyapunov稳定理论和平方和方法，设计了满足控制输入约束的栖落机动多项式模糊控制器。对非变体与变体下的栖落机动控制过程进行了仿真，结果验证了控制律的有效性，并且表明变体辅助的无人机具有更强的操纵性能，能提高栖落机动中升降舵的抗饱和能力。     

GNSS观测数据ZTD建模的质量控制方法

针对目前基于GNSS观测数据的对流层天顶总延迟(ZTD)模型缺乏有效质量控制手段的现状,提出了一套综合考虑数据量、网格分辨率以及模型稳定性的ZTD建模质量控制方法,并采用内华达大地测量实验室(NGL)解算的高空间分辨率GNSS对流层数据,选取了近十年德国及周边区域[47°N-55°N,5°E-15°E]183个测站的实测ZTD,对该方法进行了校验。实验结果表明:在该质量控制方法下建立的新模型精度稳定,平均均方根误差(RMS)为3.4 cm,相对于UNB3m、EGNOS、GPT2w+Saas平均改善了42.4%、35.8%、33.3%。本文提出的质量控制方法有效提升了基于GNSS观测数据的ZTD模型的性能,对于ZTD建模研究具有一定的参考价值。     

航电系统集成验证环境中的试验总控系统建设

针对国内军用航空修理行业系统级综合试验现状,根据航电集成验证环境中总控系统的特点和应具有的基本功能,结合视情维修需求及现代软硬件技术状态和成熟试验验证的手段,介绍了航电系统集成验证环境中总控系统的建设思路,给出了总控系统硬件及上位机测试软件的实现方案。该总控系统的应用将提升航电系统的修理验证能力。     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

基于改进灰狼优化算法的涡扇发动机性能/喷流噪声综合优化控制研究

为保证整个飞行过程中满足噪声适航标准和飞行器的安全性,需要按照最严苛的噪声要求进行发动机设计,并留有很大的安全裕度,因而导致发动机的性能潜力未能得到发挥。本文对传统灰狼算法进行了改进,提出自适应概率变异策略,在优化过程中调整狩猎模式,提升了算法的全局搜索能力;基于该算法开展涡扇发动机性能/喷流噪声综合寻优控制研究,根据不同飞行需求对航空发动机性能进行优化,获得最佳控制量,在满足安全性和噪声指标的同时,提高发动机的性能。仿真结果表明,改进后的算法具有更好的全局寻优性能,最大推力模式下可提升推力13.45%,最小油耗模式可降低油耗3.19%,最低涡轮前温度模式可降低涡轮前温度2.07%。     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.     

基于超螺旋二阶滑模的双馈风力发电机控制策略

传统双馈风力发电机(DFIG)控制存在抖振现象,容易造成系统的不稳定。为了减轻控制抖振现象,提高控制的稳定性,在分析了DFIG动态特性的基础上,建立了DFIG的数学模型,设计了超螺旋二阶滑模控制器,并研究了突变风的情况下滑模控制器的控制性能。通过MATLAB/Simulink工具进行了仿真验证。仿真结果证明:滑模控制器具有良好的最优转矩跟踪能力和无功调节能力,与一般的控制方法相比鲁棒性较强,转子控制电压连续,控制产生的抖振可以大幅减轻,系统的稳定性大大提升。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

高超声速滑翔再入定向定速打击末制导算法

以具有终端落角和落速约束的小升阻比短距滑翔高超声速再入打击飞行器为研究对象，通过引入弹道调整段来实现对飞行器的初步大幅度减速，并使其满足中末制导交班条件，以解决飞行器捕获目标后难以直接对其进行定向定速打击的问题。首先设计了一种变角偏差反馈系数的偏置比例制导律，解决了末端攻击段弹道下压困难以及导引头视场稳定跟踪等问题。在此基础上，建立了一种基于攻角和弹道倾角估计的末端减速指令生成方法，有效解决了基于理想速度曲线减速控制方法精度不足的问题。因此，数值仿真结果表明该制导方案能够有效控制飞行器终端落角和落速，并具有较高的制导精度。